13oz on single sided, matte finish - Not for long term outdoor use
18oz on double sided, matte finish - Outdoor up to 3 years
If you are uploading a print-ready design, please create your artwork to reflect the finished size of the pole banner. We will make any necessary adjustments for the hem & pockets.
PLEASE NOTE: There are two ways to discuss pole pocket size:
1. The diameter of the pole over which the pocket will fit.
2. The size of the pocket from the edge of the material to the seam.
Our default Pocket size is 3". This will fit over a 1" Diameter pole.
If you require a special pole pocket size, please write in the desired pocket size, OR the diameter of the pole it needs to fit on in the notes of your order, and we will be happy to accommodate your request.
Below is a chart showing coordinating pocket sizes and pole diameters.
If you need to calculate a different pocket size, and you know the pole diameter, use this formula: (Pi) 3.14 x the Diameter of the pole + 1" for slack + 1" for the sewing ÷ 2 = Pocket size.
For example, to calculate pocket size for a 2" Diameter pole: 3.14 x 2 = 6.28 + 1 + 1 = 8.28 ÷ 2 = 4.14" Always round up to the nearest inch. So this 2” Diameter pole requires a 5” pocket.
Pole Banner Specifications:
Finishing Standard 3" Stitched Pole Pockets installed at top and bottom (3" Pocket accommodates up to a 1.375" Diameter pole). Nickel Grommets in seams on all four corners
Installation Use pole pockets slide over pole posts and tie around the main pole through the grommets secure the banner to the pole.
Suggested Uses Pole Banners, Hanging Banners
Custom Printing Information:
Printing - Full Color, Digital 6 Color 600dpi
Bleeds - All artwork should be the size of the finished pole banner. Please keep important artwork 4” from edges that will have pockets.